Product type
Panel feed-through terminal block
Nominal current I<sub>N</sub>
Nominal voltage U<sub>N</sub>
Rated surge voltage (III/3)
Connection method
Screw connection with tension sleeve
Solder/Slip-on connection
Connection direction of the conductor to plug-in direction
Conductor cross-section rigid
0.2 mm² ... 1.5 mm²
0.2 mm² ... 4 mm²
Conductor cross-section flexible
0.2 mm² ... 1.5 mm²
0.2 mm² ... 2.5 mm²
Conductor cross-section, flexible, with ferrule, without plastic sleeve
Conductor cross-section, flexible, with ferrule, with plastic sleeve
2 conductors with same cross section, rigid
2 conductors with same cross section, flexible
2 conductors with same cross section, flexible, with ferrule without plastic sleeve
Internal cylindrical gage
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Insulating material group
CTI according to IEC 60112
Flammability rating according to UL 94
Safety note
• Observe the technical data provided here and refer to the documents listed under “Downloads”. The download area contains important information, such as installation notes, technical drawings, and 3D data.
• Only electrically qualified personnel may install and operate the product.<br/>To recognize and prevent danger, the qualified personnel must be familiar with the basics of electrical engineering.
• The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection.
Specification
IEC 60068-2-6:2007-12
IEC 60695-2-11:2014-02
IEC 60947-7-1:2009-04
Conductor cross-section/conductor type/tractive force setpoint/actual value
0.2 mm² / flexible / > 10 N
0.2 mm² / solid / > 10 N
2.5 mm² / flexible / > 50 N
4 mm² / solid / > 60 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Comparative tracking index (IEC 60112)
Rated insulation voltage (III/3)
minimum clearance value - non-homogenous field (III/3)
minimum creepage distance (III/3)