Switching capacity ICN
Active current limitation
Type
DIN rail module, one-piece
Maximum power dissipation for nominal condition
Switching capacity I<sub>CN</sub>
Active current limitation
Operating voltage
18 V DC ... 32 V DC
24 V DC
Nominal current I<sub>N</sub>
Required backup fuse
not required, integrated failsafe element
Dielectric strength
max. 32 V DC (Load circuit)
Active current limitation
Closed-circuit current range I0
typ. 25 mA ±5 mA (When switched on)
MTBF (IEC 61709, SN 29500)
6590000 h (at 40 °C with 80 % load)
7430000 h (at 25 °C with 80 % load)
Voltage drop
180 mV (at I<sub>N</sub>)
Contact switching type
without electrical isolation
Voltage
< 3 V DC (Low state)
> 8 V DC (High state)
Output current
max. 0.2 A (Short-circuit-proof)
Tightening torque
... 0.5 Nm
... 1.2 Nm
0.5 Nm
1.2 Nm
Conductor cross-section rigid
Cross section AWG
26 ... 6 (converted acc. to IEC)
Conductor cross-section flexible
Conductor cross-section, flexible [AWG]
20 ... 6 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
0.25 mm² ... 2.5 mm²
0.5 mm² ... 10 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)
0.25 mm² ... 2.5 mm²
0.5 mm² ... 10 mm²
2 conductors with same cross section, rigid
2 conductors with the same cross-section AWG rigid
20 ... 12 (converted acc. to IEC)
2 conductors with same cross section, flexible