Product type
PCB terminal block
Printed circuit board terminal
Classification temperature Tc
Solder pins per potential
Nominal current I<sub>N</sub>
Nominal voltage U<sub>N</sub>
Rated surge voltage (III/3)
Rated surge voltage (III/2)
Rated surge voltage (II/2)
Connection method
Push-in spring connection
Conductor cross-section rigid
Conductor cross-section flexible
0.2 mm² ... 0.5 mm² (up to 0.75 mm² supported, with a stripping length of 7.5 mm and a rated insulation voltage of 32 V at III/2)
Conductor cross-section AWG
Conductor cross-section, flexible, with ferrule, without plastic sleeve
Conductor cross-section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 0.34 mm² (possible from 0.14 mm², when using ferrule AI 0.14- 6 GY in combination with crimping pliers CRIMPFOX 10T-F)
Cylindrical gauge a x b / diameter
Classification temperature T<sub>c</sub>
Solder cycles in the reflow
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Metal surface terminal point (top layer)
Metal surface soldering area (top layer)
Insulating material group
CTI according to IEC 60112
Flammability rating according to UL 94
Note on application
Pick and place pads may protrude beyond the components. The PCB layout must ensure that collisions are avoided when components are assembled.
Specification
IEC 60068-2-6:2007-12
IEC 60664-1:2007-04
IEC 60998-1:2002-12
IEC 60998-2-1:2002-12
IEC 60998-2-2:2002-12