Order information:
Fuse-link not supplied as standard
Note on application
A small current was set via the LED display for special applications. The light intensity of the LED is very low due to the low current.<br/>Manufacturer's information for the LED: 5 ... 13 mcd at 2 mA.
The current is determined by the fuse used, the voltage by the selected LED.<br/>If the fuse is faulty, the downstream circuit will not be disconnected.
Maximum power dissipation for nominal condition
LED voltage range
12 V AC/DC ... 30 V AC/DC
Maximum power dissipation
max. 1.6 W (With interconnected arrangement of several fuse terminal blocks in the event of overload)
max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
max. 2.5 W (With interconnected arrangement of several fuse terminal blocks in the event of a short-circuit)
max. 4 W (with single arrangement of the fuse terminal block in the event of a short-circuit)
Number of connections per level
Internal cylindrical gage
Conductor cross-section rigid
Cross section AWG
26 ... 10 (converted acc. to IEC)
Conductor cross-section flexible
Conductor cross-section, flexible [AWG]
26 ... 10 (converted acc. to IEC)
Conductor cross-section flexible ultrasound-compressed
Conductor cross-section, flexible [AWG] ultrasound-compressed
22 ... 10 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
Flexible conductor cross-section (ferrule with plastic sleeve)
2 conductors with same cross section, rigid
2 conductors with same cross section, flexible
Operating temperature range
Ex-certified accessories
1205053 SZS 0,6X3,5
3022218 CLIPFIX 35
3022276 CLIPFIX 35-5
Connection capacity rigid
Connection capacity flexible
2 conductors with same cross section, solid
2 conductors with the same cross-section AWG rigid
2 conductors with same cross section, stranded