Color (Housing)
white aluminium (RAL 9006)
Notes on operation
Designed to function with all 48 V DC QUINT and TRIO power supplies.
Mode A or Mode B PoE
Connection method
RJ45
Screw connection
SFP
Transmission speed
10/100 Mbps
100/1000 Mbps (full duplex)
Transmission physics
Depending on the SFP module
Ethernet in RJ45 twisted pair
Transmission length
100 m
up to 80 km (Depending on the fiber/SFP module used)
Signal LEDs
Data receive, link status
No. of channels
1 (SFP port)
4 (RJ45 PoE ports)
Note on the connection method
Auto negotiation and autocrossing
MTTF
21.3 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)
Diagnostic functions
LLDP (Link Layer Discovery Protocol)
N:1-Portmirroring
RMON History
SNMP-Traps
Filter functions
IGMP Query
IGMP Snooping (256 groups)
Port prioritization
Quality of Service (8 and 64 priority classes)
VLAN (up to 64 VLANs)
Management
SNMPv1/v2/v3
Web-based management (HTTP/HTTPS)
Redundancy
ERR (Extended ring redundancy (15 ms))
MSTP (Multiple Spanning Tree Protocol)
RSTP (Rapid Spanning Tree Protocol)
Status and diagnostic indicators
LEDs: U<sub>S1</sub>, U<sub>S2</sub> (redundant voltage supply), Alarm (alarm contact), Link/Activity and PoE per Ethernet port
Additional functions
Transmission of MMS and GOOSE (IEC 61850-8-1)
Time synchronization
SNTP (Simple Network Time Protocol)
Local diagnostics
Alarm Power failure at US1 or US2/Link failure
LNK/ACT Link status/data transmission Green LED
PoE PoE detection Orange LED
US1, US2 Supply voltage Green LED
Maximum power dissipation for nominal condition
Supply voltage range
52 V DC ... 57 V DC (> 52 V DC for PoE+ or 60 W output recommended)
Inrush current
43.6 A (52 V DC for 1830 μs)
Residual ripple
3.6 V<sub>PP</sub> (within the permitted voltage range)
Max. current consumption
3.9 A (Maximum, nominal load)
Typical current consumption
142 mA (U<sub>S</sub> = 55 V DC)
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG
Ambient temperature (operation)
Ambient temperature (storage/transport)
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Air pressure (operation)
57 kPa ... 108 kPa (up to 4850 m above mean sea level)
Air pressure (storage/transport)
57 kPa ... 108 kPa (up to 4850 m above mean sea level)