Note
Depending on the application case and mechanical load, other arrangements of the mounting accessory can also be chosen.
One DIN rail adapter PTFIX-NS35 is intended for maximum 11 blocks.
The maximum load current of a single clamping unit must not be exceeded.
When aligning several blocks, the foot elements should be placed in a way that maximum 5 blocks are free-hanging in between. Flange elements should be placed after every 9 blocks.
Product type
Distributor terminal block
Maximum power dissipation for nominal condition
Number of connections per level
Internal cylindrical gage
Connection in acc. with standard
Conductor cross-section rigid
0.14 mm² ... 4 mm²
0.34 mm² ... 4 mm²
Cross section AWG
26 ... 12 (converted acc. to IEC)
Conductor cross-section flexible
Conductor cross-section, flexible [AWG]
26 ... 12 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
0.14 mm² ... 2.5 mm²
0.34 mm² ... 2.5 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)
0.14 mm² ... 2.5 mm²
0.34 mm² ... 2.5 mm²
Conductor cross-section, rigid [AWG]
24 ... 12 (converted acc. to IEC)
Flammability rating according to UL 94
Insulating material group
Static insulating material application in cold
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
Relative insulation material temperature index (Elec., UL 746 B)
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time withstand current 2.5 mm²
Short-time withstand current 4 mm²
Conductor cross-section/weight
0.14 mm² / 0.2 kg
2.5 mm² / 0.7 kg
4 mm² / 0.9 kg
Specification
DIN EN 50155 (VDE 0115-200):2008-03