Product type
Distributor terminal block
Maximum power dissipation for nominal condition
Number of connections per level
Connection in acc. with standard
IEC 60947-7-1
IEC 60998-2-2
Conductor cross-section rigid
0.2 mm² ... 6 mm²
0.5 mm² ... 6 mm²
Cross section AWG
24 ... 10 (converted acc. to IEC)
Conductor cross-section flexible
Conductor cross-section, flexible [AWG]
24 ... 10 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
0.2 mm² ... 4 mm²
0.75 mm² ... 4 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)
0.2 mm² ... 4 mm²
0.5 mm² ... 4 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Maximum load current
38 A (bei 6 mm² Leiterquerschnitt starr)
Maximum total current
The maximum load current of the individual terminal point must not be exceeded.
Nominal voltage
450 V (in accordance with IEC 60998-2-2)
800 V
Note
Depending on the application case and mechanical load, other arrangements of the mounting accessory can also be chosen.
The IEC 60947-7-1 standard applies for the use of mounting accessories.
Internal cylindrical gage
Conductor cross-section, rigid [AWG]
20 ... 10 (converted acc. to IEC)
Flammability rating according to UL 94
Insulating material group
Static insulating material application in cold
Relative insulation material temperature index (Elec., UL 746 B)
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time withstand current 4 mm²
Short-time withstand current 6 mm²
Conductor cross-section/weight
0.2 mm² / 0.2 kg
4 mm² / 0.9 kg
6 mm² / 1.4 kg
Specification
DIN EN 50155 (VDE 0115-200):2008-03
Spectrum
Long life test category 2, bogie-mounted
Frequency
f<sub>1</sub> = 5 Hz to f<sub>2</sub> = 250 Hz