Product type
Distributor terminal block
Maximum power dissipation for nominal condition
Number of connections per level
Connection in acc. with standard
IEC 60947-7-1
IEC 60998-2-2
Conductor cross-section rigid
0.2 mm² ... 6 mm²
0.5 mm² ... 6 mm²
Cross section AWG
24 ... 10 (converted acc. to IEC)
Conductor cross-section flexible
Conductor cross-section, flexible [AWG]
24 ... 10 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
0.2 mm² ... 4 mm²
0.75 mm² ... 4 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)
0.2 mm² ... 4 mm²
0.5 mm² ... 4 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Maximum load current
38 A (bei 6 mm² Leiterquerschnitt starr)
Maximum total current
The maximum load current of the individual terminal point must not be exceeded.
Nominal voltage
450 V (in accordance with IEC 60998-2-2)
800 V
Note
Depending on the application case and mechanical load, other arrangements of the mounting accessory can also be chosen.
The IEC 60947-7-1 standard applies for the use of mounting accessories.
Internal cylindrical gage
Conductor cross-section, rigid [AWG]
20 ... 10 (converted acc. to IEC)
Color
black (RAL 9005)
multicolored (RAL -)
yellow (RAL 1018)
Flammability rating according to UL 94
Insulating material group
Static insulating material application in cold
Relative insulation material temperature index (Elec., UL 746 B)
Fire protection for rail vehicles (DIN EN 45545-2) R22
Fire protection for rail vehicles (DIN EN 45545-2) R23
Fire protection for rail vehicles (DIN EN 45545-2) R24
Fire protection for rail vehicles (DIN EN 45545-2) R26
Surface flammability NFPA 130 (ASTM E 162)
Specific optical density of smoke NFPA 130 (ASTM E 662)
Smoke gas toxicity NFPA 130 (SMP 800C)
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time withstand current 4 mm²
Short-time withstand current 6 mm²