Notes on operation
Do not connect adjacent channels to SELV/ PELV and voltages dangerous to the touch.
Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.
The outputs are not suitable for switching different outer conductors.
Typical input current at UN
Date of last data management
Maximum power dissipation for nominal condition
Test voltage (Winding/contact)
2.5 kV<sub>rms</sub> (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact)
2 kV<sub>rms</sub> (50 Hz, 1 min., changeover contact/changeover contact)
Nominal input voltage U<sub>N</sub>
Input voltage range
19.2 V DC ... 46.8 V DC (20 °C)
Typical input current at U<sub>N</sub>
Maximum switching voltage
Minimum switching voltage
Limiting continuous current
Maximum inrush current
12 A (20 ms, N/O contacts)
Interrupting rating (ohmic load) max.
130 W (48 V DC)
144 W (24 V DC)
1500 VA (250 V AC)
66 W (110 V DC)
88 W (220 V DC)
90 W (60 V DC)
Degree of protection (Installation location)
≥ IP54 (Installation location)
Ambient temperature (operation)
Ambient temperature (storage/transport)
Assembly note
in rows with zero spacing