Assembly note
<b>NOTE:</b> Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties.
Connection method On the device side
Connection method On the field side
Frequency of connections between conductors of the same cross section
Conductor cross-section flexibel
Conductor cross-section solid
Conductor cross-section with ferrule
Connection cross section AWG
Rated surge voltage (III/3)
Nominal voltage U<sub>N</sub>
Nominal current I<sub>N</sub>
Insertion/withdrawal cycles
Material Seal
EPDM (Device)
NBR (Field)
Flammability rating according to UL 94
Structure of individual litz in acc. with VDE 0295 / smallest wire diameter
External cable diameter
6 mm ... 9 mm
8 mm ... 13 mm
Stripping length of the individual wire
Single wire, color
brown, blue, green/yellow
Degree of protection
IP66
IP68 (2 m / 24 h)
IP69K
Ambient temperature (operation)
-40 °C ... 90 °C (T = 45 °C)
Temperature when conductor connected
Ambient temperature (storage/transport)
Resistance to UV radiation