Nominal input voltage UIN
Test voltage: 5 V supply of the local bus (UBus) / functional ground
Test voltage: 5 V supply of the local bus (UBus) / digital inputs
Note on dimensions
The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).
EMC note
EMC: class A product, see manufacturer's declaration in the download area
CCCex note
Use in potentially explosive areas is not permitted in China.
Connection method
Bus base module
Push-in connection
Input address area
2 Byte (Firmware 1.00)
4 Byte (Firmware 1.03 or later)
Description of the input
NAMUR enabled digital input signals
Nominal input voltage U<sub>IN</sub>
Protective circuit
Polarity reversal protection of the inputs
Reverse polarity protection; Polarity protection diode
Surge protection; electronic (35 V, 0.5 s)
Transient protection; Suppressor diode
Mounting position
any (no temperature derating)
Scope of supply
including bus base module and Axioline P connectors
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Supply voltage
24 V DC (via bus base module)
5 V DC (via bus base module)
Current draw
max. 130 mA (via bus base module)
max. 135 mA
typ. 110 mA
typ. 94 mA (via bus base module)
Test voltage: 5 V supply of the local bus (U<sub>Bus</sub>) / functional ground
Test voltage: 5 V supply of the local bus (U<sub>Bus</sub>) / digital inputs
Test voltage: 24 V supply (I/O) / functional ground
Test voltage: 24 V supply (I/O) / digital inputs
Test voltage: Digital inputs / functional ground
Note on the connection method
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG
Ambient temperature (operation)
Air pressure (operation)
70 kPa ... 106 kPa (up to 2000 m above sea level)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 2000 m above sea level)