Note
2011
2012
The VAL-SEC-T2-GDT-800DC-P protective plug (Item No..: 1052649) is only to be used in series connection with a VAL-SEC-T2-220DC-P (Item No..: 2907879) or VAL-SEC-T2- 380DC-P (Item No..: 2907880). It is not designed for direct use on mains voltage.
U<sub>agn</sub> ≥ 600 V
Protective conductor current IPE
Nominal discharge current In (8/20) µs
Maximum discharge current Imax (8/20) µs
Voltage protection level Up
Residual voltage Ures
≤ 0.5 kV (at 10 kA)
≤ 0.5 kV (at 2 kA)
≤ 0.5 kV (at 4 kA)
≤ 0.5 kV (at 5 kA)
≤ 0.5 kV (at I<sub>n</sub>)
Surge protection fault message
Flammability rating according to UL 94
Protective conductor current I<sub>PE</sub>
Nominal discharge current I<sub>n</sub> (8/20) µs
Maximum discharge current I<sub>max</sub> (8/20) µs
Voltage protection level U<sub>p</sub>
Residual voltage U<sub>res</sub>
≤ 0.5 kV (at 10 kA)
≤ 0.5 kV (at 2 kA)
≤ 0.5 kV (at 4 kA)
≤ 0.5 kV (at 5 kA)
≤ 0.5 kV (at I<sub>n</sub>)
Front-of-wave sparkover voltage at 6 kV (1.2/50) µs
Response time t<sub>A</sub>
Ambient temperature (operation)
Ambient temperature (storage/transport)
Permissible humidity (operation)
Shock (operation)
30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation)
5g (10 ... 500 Hz / 2.5 h / X, Y, Z)