Test voltage: PROFINET interface 1 / 24 V communications voltage (UL) feed-in
Test voltage: PROFINET interface 2 / 24 V communications voltage (UL) feed-in
Test voltage: 24 V communications voltage (UL) feed-in / functional ground
Note on dimensions
The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).
Volume concentration H2S (Hydrogen sulfide)
Volume concentration NO2 (Nitrogen dioxide)
Volume concentration Cl2 (Chlorine)
Supported protocols
BootP (BootP only to perform firmware updates)
DCP
DDI
LLDP
MRP
PROFINET
PTCP
SNMP
TFTP
Volume concentration SO2 (Sulfur dioxide)
Connection method
Bus base module
Push-in connection
RJ45 jack
USB type C
Note on the connection method
Auto negotiation and autocrossing
Please observe the information provided on conductor cross-sections in the “Axioline F: system and installation” user manual.
Transmission speed
100 Mbps
100 Mbps (Full duplex)
Transmission physics
Ethernet in RJ45 twisted pair
Amount of process data (Input data)
Amount of process data (Output data)
Number of supported devices
Number of IO-Link masters (Hard limit/test)
Number of local bus devices that can be connected
Special properties
Extreme conditions version
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Supply voltage
24 V DC
5 V DC (via bus base module)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw
max. 690 mA (2.0 A on U<sub>Bus</sub>, U<sub>L</sub> = 24 V)
Current consumption
typ. 107 mA (without I/O modules, U<sub>L</sub> = 24 V)
Protective circuit
Reverse polarity protection; electronic
Surge protection; electronic
Test voltage: PROFINET interface 1 / PROFINET interface 2
Test voltage: PROFINET interface 1 / 24 V communications voltage (U<sub>L</sub>) feed-in
Test voltage: PROFINET interface 2 / 24 V communications voltage (U<sub>L</sub>) feed-in
Test voltage: PROFINET interface 1 / functional ground
Test voltage: PROFINET interface 2 / functional ground