Recommendation
Material of contact pads for bus connector, galvanic gold (hard gold)
Contact holder in insertRequirements >20 N
Insertion strength per pos. approx.
Withdraw strength per pos. approx.
Contact holder in insert<br/>Requirements >20 N
Nominal current I<sub>N</sub>
Impulse withstand voltage at sea level
Nominal voltage U<sub>N</sub>
Contact resistance R<sub>1</sub>
Contact resistance R<sub>2</sub>
Rated surge voltage (III/3)
Insertion/withdrawal cycles
Corrosive stress
0.2 dm<sup>3 </sup>SO<sub>2 </sub>on 300 dm<sup>3</sup>/40 °C/1 cycle
Rated surge voltage (III/2)
Power-frequency withstand voltage
Rated surge voltage (II/2)
Amplitude
0.15 mm (10 Hz ... 58.1 Hz)
Acceleration
15g
2g (58.1 Hz ... 150 Hz)
Insulating material group
CTI according to IEC 60112
Test directions
X-, Y- and Z-axis (pos. and neg.)
Flammability rating according to UL 94