Nominal input voltage UIN
Nominal input current at UIN
EMC note
EMC: class A product, see manufacturer's declaration in the download area
Connection method
Push-in / plug connection
Push-in connection
RJ45 jack
Transmission speed
10/100 Mbps (with auto negotiation)
Transmission physics
Ethernet in RJ45 twisted pair
System-specific protocols
DCE/RPC
PROFINET protocols DCP
PROFINET protocols LLDP
PROFINET protocols MRP client
Protocols supported
BootP
DHCP
FTP
HTTP
SNMP v1
SSH
TFTP
Description of the input
Digital inputs (DI)
IEC 61131-2 type 1
IO-Link ports in digital input (DI) mode
Number of inputs
8
max. 8 (EN 61131-2 types 1 and 3)
Input voltage range "0" signal
0 V DC ... 5 V DC
5.2 V DC ... 6.4 V DC
8 V DC ... 11.5 V DC (for C/Q pin)
Input voltage range "1" signal
10.5 V DC ... 13 V DC
15 V DC ... 30 V DC
6.8 V DC ... 8 V DC
Nominal input voltage U<sub>IN</sub>
Nominal input current at U<sub>IN</sub>
Protective circuit
Overload protection
Overload protection; yes
Short-circuit protection for the sensor supply
Short-circuit protection; yes
Sensor current per channel
Cycle Time
min. 4 ms (IO-Link cycle time)
Maximum output current per channel
Output description
IO-Link ports in digital output (DO) mode
Maximum output current per module
Nominal load, ohmic
4.8 W (120 Ω, at nominal load)
Output voltage when switched off
Output current when switched off
Behavior with overload
Shutdown with automatic restart
Maximum power dissipation for nominal condition
Nominal voltage for I/O supply
Nominal current for every IO-Link port
max. 200 mA (at C/Q)
max. 200 mA (at L+/L-)
Supply voltage range
10.8 V DC ... 30 V DC
18 V DC ... 30 V DC