Current consumption IN (UN, IOUT = IN, Icharge = 0)
Current consumption Imax (UN, IOUT = IStat.Boost, ICharge = max)
Current consumption INo-Load(UN, IOUT = 0, Icharge = 0)
Current consumption I<sub>N</sub> (U<sub>N</sub>, I<sub>OUT</sub> = I<sub>N</sub>, I<sub>charge</sub
Current consumption Icharge (UN, IOUT = 0, Icharge = max)
Current consumption I<sub>max</sub> (U<sub>N</sub>, I<sub>OUT</sub> = I<sub>Stat.Boost</sub>, I<sub>
Power consumption Pmax (UN, IOUT = IStat.Boost, Icharge = max)
Current consumption I<sub>No-Load</sub>(U<sub>N</sub>, I<sub>OUT</sub> = 0, I<sub>charge</sub> = 0)
Power consumption PN (UN, IOUT = IN, Icharge = 0)
Current consumption I<sub>charge</sub> (U<sub>N</sub>, I<sub>OUT</sub> = 0, I<sub>charge</sub> = max
Power consumption Pcharge (UN, IOUT = 0, Icharge = max)
Power consumption P<sub>max</sub> (U<sub>N</sub>, I<sub>OUT</sub> = I<sub>Stat.Boost</sub>, I<sub>ch
Power consumption P<sub>N</sub> (U<sub>N</sub>, I<sub>OUT</sub> = I<sub>N</sub>, I<sub>charge</sub>
Static Boost (IStat.Boost)
Output power POUT (UN, IOUT = IN)
Power consumption P<sub>charge</sub> (U<sub>N</sub>, I<sub>OUT</sub> = 0, I<sub>charge</sub> = max)
Buffer time
30 s (20 A)
4 min (2.5 A)
Output power POUT (UN, IOUT = Istat.Boost)
Charging time
approx. 2.1 min (10 A)
approx. 6.3 min (2.5 A)
Power dissipation No load (UN, IOut = 0, ICharge = 0)
Power dissipation Nominal load (UN, IOut = IN, ICharge = 0)
Recharging time
approx. 1.4 min (10 A)
approx. 5.4 min (2.5 A)
Dielectric strength
max. 35 V DC (Reverse polarity protection)
Voltage drop, input/output
Efficiency
> 98 % (with charged energy storage device)
Output voltage
24 V DC
27 V (U<sub>N</sub> - 1 V (typical))
max. 30 V
Output current I<sub>N</sub>
Output power P<sub>OUT</sub> (U<sub>N</sub>, I<sub>OUT</sub> = I<sub>N</sub>)
Output power P<sub>OUT</sub> (U<sub>N</sub>, I<sub>OUT</sub> = I<sub>stat.Boost</sub>)
Power dissipation No load (U<sub>N</sub>, I<sub>Out</sub> = 0, I<sub>Charge</sub> = 0)
Power dissipation Nominal load (U<sub>N</sub>, I<sub>Out</sub> = I<sub>N</sub>, I<sub>Charge</sub> =
Short-circuit-proof
yes
yes (with input fuse)
Position marking
1.1 (+), 1.2 (+), 1.3 (-), 1.4 (-)
2.1 (+), 2.2 (-)
3.1 (13), 3.2 (14), 3.3 (Alarm), 3.4 (Ready), 3.5 (Remote), 3.6 (Parallel Port), 3.7 (SGnd)
Connection method
Push-in connection
RJ45
Screw connection
rigid
0.2 mm² ... 1 mm²
0.2 mm² ... 1.5 mm²
0.2 mm² ... 6 mm²
flexible
0.2 mm² ... 1.5 mm²
0.2 mm² ... 4 mm²