EMC note
EMC: class A product, see manufacturer's declaration in the download area
Housing material
Polycarbonate fiber reinforced
Connection method
Push-in spring connection
RJ45
SC
Note on the connection method
Auto negotiation and autocrossing
Transmission speed
10/100 Mbps
100 Mbps (Full duplex)
Transmission physics
Ethernet in RJ45 twisted pair
multi-mode fiberglass
Transmission length
100 m (per segment)
4.29 km (fiberglass with F-G 50/125 0.7 dB/km F1200)
8 km (fiberglass with F-G 62.5/125 0.7 dB/km F1000)
Signal LEDs
Data receive, link status
No. of channels
1 (SC multi-mode)
4 (RJ45 ports)
Transmit capacity, minimum
Transmit capacity, maximum
Minimum receiver sensitivity
Maximum receiver sensitivity
MTTF
115.1 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%)
279.5 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
427.5 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
Basic functions
Autonegotiation
Store and Forward switching mode
Unmanaged switch
PROFINET conformance class
Status and diagnostic indicators
LEDs: U<sub>S</sub>, link and activity per port
Additional functions
100 BASE-TX/100BASE-FX (IEEE 802.3u)
10Base-T (IEEE 802.3)
Energy-efficient Ethernet (IEEE 802.3az)
Quality of Service (QoS) prioritization (IEEE 802.1p)
Maximum power dissipation for nominal condition
Supply voltage range
18 V AC ... 30 V AC (50/60 Hz)
9 V DC ... 32 V DC
Power supply connection
Via COMBICON, max. conductor cross-section 2.5 mm²
Residual ripple
3.6 V<sub>PP</sub> (within the permitted voltage range)
Typical current consumption
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG
Conductor cross-section, flexible, with ferrule, with plastic sleeve
Conductor cross-section, flexible, with ferrule, without plastic sleeve