Test voltage: 5 V supply of the local bus (UBus) / functional ground
Test voltage: 5 V supply of the local bus (UBus) / analog inputs
Note on dimensions
The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).
EMC note
EMC: class A product, see manufacturer's declaration in the download area
Safety-related maximum voltage Um
A, B / IIC: Max. external inductivity Lo / Max. external capacitance Co
CCCex note
Use in potentially explosive areas is not permitted in China.
C/IIB, IIIC: Max. external inductivity Lo / Max. external capacitance Co
D/IIA, E, F, G, Class III: Max. external inductivity Lo / Max. external capacitance Co
Connection method
Bus base module
Push-in connection
Protective circuit
Polarity reversal protection of the outputs
Reverse polarity protection; Polarity protection diode
Surge protection; electronic (35 V, 0.5 s)
Transient protection; Suppressor diode
Maximum output current per channel
Mounting position
any (no temperature derating)
Scope of supply
including bus base module and connectors
Special properties
intrinsically safe
Solenoid drive
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Supply voltage
24 V DC (via bus base module)
5 V DC (via bus base module)
Current draw
max. 135 mA
max. 455 mA (via bus base module)
typ. 110 mA
typ. 324 mA (via bus base module)
Test voltage: 5 V supply of the local bus (U<sub>Bus</sub>) / functional ground
Test voltage: 5 V supply of the local bus (U<sub>Bus</sub>) / analog inputs
Test voltage: 24 V supply (I/O) / functional ground
Test voltage: 24 V supply (I/O) / analog inputs
Test voltage: Analog inputs / functional ground
Note on the connection method
Conductor cross-section, rigid