Nominal input voltage UIN
Nominal input current at UIN
Connection method
Card edge connector
Push-in connection
Transmission speed
See system in which you use the Smart Element.
Required configuration data
Number of inputs
4 (2-channel assignment)
8 (1-channel assignment)
Cable length
max. 200 m (200 m from the clock output to the safe input (total based on forward and return path))
Input voltage range "0" signal
Input voltage range "1" signal
Nominal input voltage U<sub>IN</sub>
Nominal input current at U<sub>IN</sub>
Input filter time
1.5 ms
15 ms
3 ms (Default)
5 ms
Protective circuit
Polarity reversal protection of the inputs; Diode
Polarity reversal protection of the supply voltage; via the system in which the Smart Element is used
Surge protection of the supply voltage; electronic (35 V, 0.5 s)
Application
Failsafe over EtherCAT®
Functional safety
Maximum power dissipation for nominal condition
Protection
external fusing via the system in which the Smart Element is used
Supply voltage
24 V DC (using card edge connectors)
5 V DC (via bus base module)
using card edge connectors
Current draw
max. 12 mA (Power supply from U<sub>p</sub> with 30 V DC, all inputs set, without power supply to the sensors via clock supplies OUT_T1 and OUT_T2)
max. 140 mA (at U<sub>Bus</sub> 5 V DC)
typ. 101 mA (at U<sub>Bus</sub> 5 V DC)
typ. 9 mA (Power supply from U<sub>p</sub> with 24 V DC, all inputs set, without power supply to the sensors via clock supplies OUT_T1 and OUT_T2)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Note on the connection method
Note the specification in the section Conductor cross-sections, and stripping and insertion lengths.
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG
Ambient temperature (operation)
Degree of protection at installation location
Air pressure (storage/transport)
Ambient temperature (storage/transport)