Classification temperature Tc
Type
Component suitable for through hole reflow
Contact holder in insertRequirements >20 N
Solder pins per potential
Nominal current I<sub>N</sub>
Nominal voltage U<sub>N</sub>
Rated surge voltage (III/3)
Rated surge voltage (III/2)
Rated surge voltage (II/2)
Classification temperature T<sub>c</sub>
Solder cycles in the reflow
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Metal surface contact area (top layer)
Metal surface contact area (middle layer)
Nickel (1.3 µm - 3 µm Ni)
Metal surface soldering area (top layer)
Metal surface soldering area (middle layer)
Nickel (1.3 µm - 3 µm Ni)
Insulating material group
CTI according to IEC 60112
Flammability rating according to UL 94
Glow wire flammability index GWFI according to EN 60695-2-12
Glow wire ignition temperature GWIT according to EN 60695-2-13
Temperature for the ball pressure test according to EN 60695-10-2
Assembly note
Please observe the application note in the download area.
Safety note
• The item is intended to be an unencapsulated plug for installation in a housing.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Specification
IEC 60068-2-6:2007-12
IEC 60068-2-70:1995-12
IEC 60512-1-1:2002-02
IEC 60512-1-2:2002-02
IEC 60512-13-2:2006-02
IEC 60512-13-5:2006-02
IEC 60512-15-1:2008-05
IEC 60512-3-1:2002-02
IEC 60512-5-1:2002-02
IEC 60512-9-1:2010-03
IEC 60664-1:2007-04
ISO 6988:1985-02
Contact holder in insert<br/>Requirements >20 N
Insertion strength per pos. approx.
Withdraw strength per pos. approx.
Tested number of positions