Rated control circuit supply voltage US
19.2 V DC ... 28.8 V DC
24 V DC -20 % / +20 % (provide external protection, typically 5 A)
Rated control supply current IS
typ. 20 mA (Outputs active, without load)
typ. 30 mA
Restart time
max. 10 s (Boot time)
min. 5 s (Boot time)
Maximum power dissipation for nominal condition
3.5 W (with max. permissible load)
Interfaces
DIN rail TBUS for connection to the master module, supplied as standard
Rated surge voltage/insulation
Rated control circuit supply voltage U<sub>S</sub>
19.2 V DC ... 28.8 V DC
24 V DC -20 % / +20 % (provide external protection, typically 5 A)
Rated control supply current I<sub>S</sub>
typ. 20 mA (Outputs active, without load)
typ. 30 mA
Power consumption at U<sub>S</sub>
Inrush current
10 A (at both terminal points 5 and 6, Δt = 1 ms at U<sub>s</sub>)
2 A (Δt = 1 ms at U<sub>s</sub>)
Filter time
typ. 1 ms (in the event of voltage dips)
typ. 5 ms (at A1 in the event of voltage dips at U<sub>s</sub>)
Protective circuit
Serial protection against polarity reversal
Suppressor diode
Output description
non-safety-related
PNP, IEC 61131-2 Typ 0,1
Reference ground A2
Output voltage when switched off
Output voltage range
18.2 V DC ... 27.8 V DC (U<sub>S</sub> - 1 V)
Maximum inrush current
1.1 A (Δt = 3 s at U<sub>s</sub>)
Limiting continuous current
1.6 A (Total current of all digital signal outputs)
100 mA (per channel)
Ohmic load
min. 180 Ω (Observe limiting continuous current)
Switching frequency
max. 1/(4 x t<sub>Cycle</sub>) [Hz]
Short-circuit protection
Yes (self-limitation at 1.1 A)
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG
Status display
1 x LED (green), 2 x LED (orange)
16 x LED (yellow)
Operating voltage display