Inrush current integral (I2t)
Nominal input voltage range
Nominal output current (IN)
Typical national grid voltage
Voltage type of supply voltage
Inrush current integral (I<sup>2</sup>t)
Current consumption
typ. 30 mA (1500 V DC)
typ. 85 mA (450 V DC)
Recommended breaker for input protection
Recommended fuse for input protection
Efficiency
typ. 83 % (1500 V DC)
typ. 87 % (900 V DC)
typ. 88 % (500 V DC)
Nominal output current (I<sub>N</sub>)
Derating
> 60 °C ... 70 °C (2.5 %/K)
Feedback voltage resistance
Protection against overvoltage at the output (OVP)
Control deviation
< 0.1 % (change in input voltage ±10 %)
< 1 % (change in load, static 10 % ... 90 %)
< 3 % (Dynamic load change 10 % ... 90 %, 10 Hz)
Residual ripple
< 40 mV<sub>PP</sub> (Ripple)
< 50 mV<sub>PP</sub> (Noise)
Maximum no-load power dissipation
< 1.1 W (500 V DC)
< 1.4 W (900 V DC)
< 2.4 W (1500 V DC)
Power loss nominal load max.
< 4.2 W (500 V DC)
< 5.5 W (900 V DC)
< 7.5 W (1500 V DC)
Rise time
≤ 30 ms (U<sub>OUT</sub> (10 % ... 90 %))
Connection in parallel
yes, for redundancy and increased capacity
Fuse protection (secondary side)
Conductor cross-section, rigid min.
Conductor cross-section, rigid max.
Conductor cross-section flexible min.
Conductor cross-section flexible max.
Single conductor/flexible terminal point with ferrule with plastic sleeve, min.
Single conductor/flexible terminal point with ferrule with plastic sleeve, max.
Single conductor/flexible terminal point with ferrule without plastic sleeve, min.
Single conductor/flexible terminal point with ferrule without plastic sleeve, max.
Conductor cross-section AWG min.
Conductor cross-section AWG max.
Signalization designation
Note on status display
U<sub>OUT</sub> > 21.5 V: LED lights up
DC OK
U<sub>OUT</sub> > 0.9 x U<sub>N</sub> (U<sub>N</sub> = 24 V DC)
13/14
U<sub>OUT</sub> > 0.9 x U<sub>N</sub> (U<sub>N</sub> = 24 V DC)
Insulation voltage input/output
2.6 kV DC (routine test)
4.2 kV DC (type test)