Product type
PCB terminal block
Printed circuit board terminal
Conductor cross-section rigid
0.75 mm² ... 16 mm² (Conductor connection with open terminal point)
1.5 mm² ... 16 mm² (Push-in connection)
Single-conductor/terminal point multi-stranded
Conductor cross-section flexible
Conductor cross-section AWG
Conductor cross-section, flexible, with ferrule, without plastic sleeve
Conductor cross-section, flexible, with ferrule, with plastic sleeve
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Metal surface terminal point (top layer)
Metal surface soldering area (top layer)
Insulating material group
CTI according to IEC 60112
Flammability rating according to UL 94
Glow wire flammability index GWFI according to EN 60695-2-12
Glow wire ignition temperature GWIT according to EN 60695-2-13
Temperature for the ball pressure test according to EN 60695-10-2
Color (Actuating element)
Notes on operation
The single-position PCB terminal block can be used for voltages up to 1500 V (DC) and 1000 V (AC). The relevant device standard and the appropriate required air clearances and creepage distances should be observed following installation
Specification
IEC 60068-2-6:2007-12
IEC 60512-3-1:2002-02
IEC 60695-2-10:2013-04
IEC 60947-7-4:2019-01
IEC 60999-1:1999-11
Conductor cross-section/conductor type/tractive force setpoint/actual value
0.75 mm² / flexible / > 30 N
0.75 mm² / solid / > 30 N
16 mm² / solid / > 100 N
25 mm² / flexible / > 135 N
Requirement temperature-rise test
The sum of ambient temperature and temperature rise of the PCB terminal block shall not exceed the upper limiting temperature.
Insulation resistance, neighboring positions