Notes on operation
Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.
The outputs are not suitable for switching different outer conductors.
Mechanical service life
approx. 10<sup>7</sup> cycles
Date of last data management
Maximum power dissipation for nominal condition
Test voltage (Winding/contact)
2 kV<sub>rms</sub> (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact)
2 kV<sub>rms</sub> (50 Hz, 1 min., changeover contact/changeover contact)
Test voltage (open contact)
1 kV<sub>rms</sub> (50 Hz, 1 min., open contact)
Input voltage range
18 V DC ... 26.4 V DC (20 °C)
Typical input current at UN
Maximum switching voltage
Minimum switching voltage
Limiting continuous current
Interrupting rating (ohmic load) max.
100 W (110 V DC)
100 W (220 V DC)
120 W (60 V DC)
150 W (48 V DC)
240 W (24 V DC)
2500 VA (250 V DC)
Degree of protection (Relay)
Degree of protection (Installation location)
≥ IP54 (Installation location)
Ambient temperature (operation)
Ambient temperature (storage/transport)
Assembly note
in rows with zero spacing