Solder pins per potential
Rated surge voltage (III/3)
Rated surge voltage (III/2)
Rated surge voltage (II/2)
Connection method
Push-in spring connection
Conductor cross-section rigid
0.2 mm² ... 1.5 mm² (Conductor connection with open terminal point)
0.34 mm² ... 1.5 mm² (Push-in connection)
Conductor cross-section flexible
Conductor cross-section AWG
Conductor cross-section, flexible, with ferrule, without plastic sleeve
0.25 mm² ... 1.5 mm² (Stripping length 8 mm)
Conductor cross-section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 0.75 mm² (Stripping length 8 mm)
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Metal surface terminal point (top layer)
Metal surface soldering area (top layer)
Insulating material group
CTI according to IEC 60112
Flammability rating according to UL 94
Glow wire flammability index GWFI according to EN 60695-2-12
Glow wire ignition temperature GWIT according to EN 60695-2-13
Temperature for the ball pressure test according to EN 60695-10-2
Specification
IEC 60068-2-6:1995-03
IEC 60512-3-1:2002-02
IEC 60695-2-10:2013-04
IEC 60947-7-4:2019-01
IEC 60999-1:1999-11
Conductor cross-section/conductor type/tractive force setpoint/actual value
0.2 mm² / flexible / > 10 N
0.2 mm² / solid / > 10 N
0.34 mm² / solid / > 15 N
1.5 mm² / flexible / > 40 N
1.5 mm² / solid / > 40 N
Requirement temperature-rise test
The sum of ambient temperature and temperature rise of the PCB terminal block shall not exceed the upper limiting temperature.