Rated surge voltage (III/3)
Rated surge voltage (III/2)
Rated surge voltage (II/2)
Conductor cross-section rigid
0.2 mm² ... 4 mm² (Conductor connection with open terminal point)
0.5 mm² ... 4 mm² (Push-in connection)
Conductor cross-section flexible
Conductor cross-section AWG
Conductor cross-section, flexible, with ferrule, without plastic sleeve
0.25 mm² ... 2.5 mm² (Conductor connection with open terminal point)
1.5 mm² ... 2.5 mm² (Push-in connection)
Conductor cross-section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 2.5 mm² (Conductor connection with open terminal point)
0.5 mm² ... 2.5 mm² (Push-in connection)
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Metal surface terminal point (top layer)
Metal surface soldering area (top layer)
Insulating material group
CTI according to IEC 60112
Flammability rating according to UL 94
Glow wire flammability index GWFI according to EN 60695-2-12
Glow wire ignition temperature GWIT according to EN 60695-2-13
Temperature for the ball pressure test according to EN 60695-10-2
Color (Actuating element)
Notes on operation
The single-position PCB terminal block can be used for voltages up to 1500 V (DC) and 1000 V (AC). The relevant device standard and the appropriate required air clearances and creepage distances should be observed following installation
Specification
IEC 60068-2-6:2007-12
IEC 60512-3-1:2002-02
IEC 60695-2-10:2013-04
IEC 60947-7-4:2019-01
IEC 60999-1:1999-11