Assembly note
<b>NOTE:</b> Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties.
Note on application
Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories".
Monitored function
Supply voltage per module
Max. operating voltage Umax
Local diagnostics
Status display I/O Yellow LED
Supply voltage per module Green LED
Max. current carrying capacity per path
Current carrying capacity per slot
Sensor/actuator connection system
Tightening torque slot sensor/actuator cable
Tightening torque - master cable - plug connection
Tightening torque of mounting screw for fixing the housing
Slot/position = Wire color or connection
1 / 4 (A) = 1
1-6 / 1 (+ 24 V) = 5
1-6 / 3 (0 V) = 7
2 / 4 (A) = 2
3 / 4 (A) = 3
4 / 4 (A) = 4
5 / 4 (A) = 6
6 / 4 (A) = 8
Material Molding compound
Material of contact, master cable side
Material of contact surface, master cable side
Ambient temperature (operation)
Standard designation
M12 connector
M8 connector
Standards/specifications
IEC 61076-2-101
IEC 61076-2-104