Product type
Surge protection for NEMA power supply units
Type
DIN rail module, two-section, divisible
Surge protection fault message
Optical, remote indicator contact
Connection name
Remote fault indicator contact
Operating voltage
125 V AC
30 V DC
5 V AC ... 250 V AC
Operating current
1 A DC
5 mA AC ... 750 mA AC
Connection method
Fork-type cable lug
Plug-in/screw connection via COMBICON
Screw connection
Tightening torque
0.25 Nm
3 Nm (1.5 mm² ... 16 mm²)
30 lb<sub>f</sub>-in.
4.5 Nm (25 mm² ... 35 mm²)
Conductor cross-section flexible
0.14 mm² ... 1.5 mm²
1.5 mm² ... 16 mm²
1.5 mm² ... 25 mm²
Conductor cross-section rigid
0.14 mm² ... 1.5 mm²
1.5 mm² ... 35 mm²
Conductor cross-section AWG
14 ... 2
15 ... 2
28 ... 16
Flammability rating according to UL 94
Maximum continuous operating voltage UC (L-PEN)
Protective conductor current IPE
Nominal discharge current In (8/20) µs
Maximum discharge current Imax (8/20) µs
Short-circuit current rating ISCCR
Voltage protection level Up
Residual voltage Ures
≤ 1.3 kV (at 3 kA)
≤ 1.5 kV (at 5 kA)
≤ 1.7 kV (at 10 kA)
≤ 1.8 kV (at I<sub>n</sub>)
TOV behavior at UT
480 V AC (5 s / withstand mode)
530 V AC (120 min / safe failure mode)
Max. backup fuse with branch wiring
Degree of protection
IP20 (only when all terminal points are used)
Ambient temperature (operation)
Ambient temperature (storage/transport)
Permissible humidity (operation)