Note on dimensions
The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).
EMC note
EMC: class A product, see manufacturer's declaration in the download area
CCCex note
Use in potentially explosive areas is not permitted in China.
Connection method
Bus base module
Push-in connection
Input voltage range "0" signal
Input voltage range "1" signal
Nominal input voltage UIN
Nominal input current at UIN
Current flow
linear until nominal current is reached, then constantly approx. 2.4 mA
Input filter time
< 200 µs
1000 µs
3000 µs (Default)
Protective circuit
Polarity reversal protection of the inputs
Reverse polarity protection; Polarity protection diode
Surge protection; electronic (35 V, 0.5 s)
Transient protection; Suppressor diode
Mounting position
any (no temperature derating)
Scope of supply
including bus base module and Axioline P connectors
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Supply voltage
24 V DC (via bus base module)
5 V DC (via bus base module)
Current draw
max. 135 mA
max. 59 mA (via bus base module)
typ. 110 mA
typ. 43 mA (via bus base module)
Test voltage: 5 V supply of the local bus (UBus) / functional ground
Test voltage: 5 V supply of the local bus (UBus) / digital inputs
Test voltage: 24 V supply (I/O) / functional ground
Test voltage: 24 V supply (I/O) / digital inputs
Test voltage: Digital inputs / functional ground
Note on the connection method
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG
Ambient temperature (operation)
Air pressure (operation)
70 kPa ... 106 kPa (up to 2000 m above sea level)