Note on dimensions
The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).
EMC note
EMC: class A product, see manufacturer's declaration in the download area
CCCex note
Use in potentially explosive areas is not permitted in China.
Supported protocols
BootP
DHCP
HTTP
Modbus/TCP
Connection method
Bus base module
Push-in connection
RJ45 jack
Note on the connection method
Auto negotiation and autocrossing
Transmission speed
100 Mbps
100 Mbps (Full duplex)
Transmission physics
Ethernet in RJ45 twisted pair
Number of supported devices
Mounting position
any (observe temperature derating)
Scope of supply
including bus base module and connectors
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Supply voltage
24 V DC
5 V DC (via bus base module)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current draw
max. 4.15 A (19.2 V DC)
typ. 125 mA (24 V DC)
Protective circuit
Reverse polarity protection; electronic
Surge protection; electronic
Power supply unit
max. 3 A (via bus base module)
Test voltage: Ethernet interface 1 / Ethernet interface 2
Test voltage: Ethernet interface 1 / 24 V communications voltage (UL) feed-in
Test voltage: Ethernet interface 2 / 24 V communications voltage (UL) feed-in
Test voltage: Ethernet interface 1 / functional ground
Test voltage: Ethernet interface 2 / functional ground
Test voltage: 24 V communications voltage (UL) feed-in / functional ground
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG
Ambient temperature (operation)
-40 °C ... 50 °C (Mounting position: any)
-40 °C ... 70 °C (Mounting position: panel mounting on horizontal DIN rail)
Air pressure (operation)
70 kPa ... 106 kPa (up to 2000 m above sea level)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 2000 m above sea level)
Ambient temperature (storage/transport)
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6
Shock in accordance with EN 60068-2-27/IEC 60068-2-27
Continuous shock in accordance with EN 60068-2-27/IEC 60068-2-27
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)