Note on dimensions
The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).
EMC note
EMC: class A product, see manufacturer's declaration in the download area
Connection method
Bus base module
Push-in connection
Description of the input
HART enabled passive analog input signals
Note regarding the connection technology
Current input signal
0 mA ... 20 mA
4 mA ... 20 mA
Data formats
Inline, S7-compatible, standard formatting
Measured value representation
16 bits (15 bits + sign bit)
Protective circuit
Polarity reversal protection of the inputs
Reverse polarity protection; Polarity protection diode
Surge protection; electronic (35 V, 0.5 s)
Transient protection; Suppressor diode
Mounting position
any (no temperature derating)
Scope of supply
including bus base module and Axioline P connectors
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Supply voltage
24 V DC (via bus base module)
5 V DC (via bus base module)
Current draw
max. 135 mA
max. 27 mA (via bus base module)
typ. 110 mA
typ. 22 mA (via bus base module)
Test voltage: 5 V supply of the local bus (UBus) / functional ground
Test voltage: 5 V supply of the local bus (UBus) / analog inputs
Test voltage: 24 V supply (I/O) / functional ground
Test voltage: 24 V supply (I/O) / analog inputs
Test voltage: Analog inputs / functional ground
Note on the connection method
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG
Ambient temperature (operation)
Air pressure (operation)
70 kPa ... 106 kPa (up to 2000 m above sea level)