Supply system configuration
Nominal input voltage range
Input voltage range
100 V AC ... 109 V AC -15 % ... +10 % (P<sub>N</sub> = 63 W)
110 V AC ... 240 V AC ±10 % (P<sub>N</sub> = 75 W)
Typical national grid voltage
Voltage type of supply voltage
Inrush current integral (I2t)
Mains buffering time
typ. 14 ms (120 V AC)
typ. 70 ms (230 V AC)
Current consumption
max. 1.5 A (63 W)
max. 1.5 A (75 W)
typ. 0.75 A (240 V AC (75 W))
typ. 1.1 A (109 V AC (63 W))
typ. 1.2 A (100 V AC (63 W))
typ. 1.3 A (110 V AC (75 W))
Protective circuit
Transient protection; Varistor
Device mains fuse
3.15 A internal (device protection), fast-blow
Recommended breaker for input protection
6 A ... 16 A (Characteristic B, C, D, K or comparable)
Efficiency
typ. 88 % (120 V AC)
typ. 89 % (230 V AC)
Setting range of the output voltage (USet)
Nominal output current (IN) (IN_PMax)
max. 3.125 A (P<sub>N</sub> = 75 W)
Nominal output current (IN) (IN_PMin)
max. 2.62 A (P<sub>N</sub> = 63 W)
Crest factor
typ. 3 (120 V AC)
typ. 4 (230 V AC)
Output power (PN)
63 W (100 V AC)
75 W (240 V AC)
Connection in parallel
yes, for increasing power and redundancy with diode
Connection in series
yes, for increased output voltage
Feedback voltage resistance
Protection against overvoltage at the output (OVP)
Residual ripple
typ. 50 mV<sub>PP</sub> (with nominal values)
Control deviation
< 0.1 % (change in input voltage ±10 %)
< 2 % (change in load, static 10 % ... 90 %)
< 4 % (change in load, dynamic 10 % ... 90 %)
Rise time
< 100 ms (U<sub>Out</sub> = 10 % ... 90 %)
Minimum no-load power dissipation
Maximum no-load power dissipation
Minimum nominal load power dissipation
Power loss nominal load max.
Integrated fuse protection
Position marking
1.1 (L1), 1.2 (N), 1.3 ()
2.1, 2.2 (+), 2.3, 2.4 (-)
rigid
0.5 mm² ... 2.5 mm²
2.5 mm² (recommended)
flexible
0.5 mm² ... 2.5 mm²
2.5 mm² (recommended)
flexible with ferrule without plastic sleeve
0.5 mm² ... 2.5 mm²
2.5 mm² (recommended)
flexible with ferrule with plastic sleeve
0.5 mm² ... 2.5 mm²
2.5 mm² (recommended)
AWG
14 (recommended)
20 ... 14 (Cu)
Stripping length
6.5 mm (Rigid/flexible/ferrule)
Tightening torque
0.5 Nm ... 0.6 Nm
5 lb<sub>f</sub>-in. ... 7 lb<sub>f</sub>-in.
Drive form screw head
Slotted Phillips recess H1L
Types of signaling
LED DC OK - signal state operation (U<sub>N</sub> = 24 V DC, I<sub>Out</sub> = I<sub>N</sub>)
Function
Visual operating state display