Inrush current integral (I2t)
Maximum altitude (Maximum)
Supply system configuration
Star network (TN, TT, IT (PE))
Nominal input voltage range
Input voltage range
100 V AC ... 240 V AC -15 % ... +10 %
100 V DC ... 240 V DC ±10 %
115 V AC ... 240 V AC ±10 % (UL)
160 V DC ... 240 V DC ±10 % (UL)
Setting range of the output voltage (USet)
Derating
< 100 V AC (1 %/V)
< 140 V DC (1 %/V)
2.5 %/K, > 60 °C
60 °C ... 70 °C
Nominal output current (IN)
Dynamic Boost (IDyn.Boost)
Typical national grid voltage
Output power (PDyn. Boost)
Voltage type of supply voltage
Inrush current integral (I<sup>2</sup>t)
Frequency range (f<sub>N</sub>)
Mains buffering time
typ. 27 ms (120 V AC)
typ. 28 ms (230 V AC)
Current consumption
1.1 A (240 V AC)
1.1 A (240 V DC)
1.2 A (230 V AC)
2.2 A (120 V AC)
2.6 A (100 V AC)
2.7 A (100 V DC)
Protective circuit
Transient protection; Varistor
Device mains fuse
6.3 A internal (device protection)
Recommended breaker for input protection
6 A ... 16 A (Characteristic B, C, D, K or comparable)
Efficiency
typ. 94.5 % (120 V AC)
typ. 95.5 % (230 V AC)
Setting range of the output voltage (U<sub>Set</sub>)
Nominal output current (I<sub>N</sub>)
Dynamic Boost (I<sub>Dyn.Boost</sub>)
Nominal current per channel
1 A
10 A
2 A
3.8 A
4 A
6 A
8 A
Rated current (pre-adjusted)
Waiting time after switch off of a channel
Switch-on delay of the channels
Crest factor
typ. 1,7 (230 V AC)
typ. 1.75 (120 V AC)
Output power (P<sub>N</sub>)
Output power (P<sub>Dyn. Boost</sub>)
Feedback voltage resistance
Protection against overvoltage at the output (OVP)
Residual ripple
typ. 50 mV<sub>PP</sub> (with nominal values)
Control deviation
< 0.1 % (change in input voltage ±10 %)
< 1 % (change in load, static 10 % ... 90 %)
< 3 % (change in load, dynamic 10 % ... 90 %)
Rise time
≤ 1 s (U<sub>Out</sub> = 10 % ... 90 %)
Minimum no-load power dissipation
Maximum no-load power dissipation