Supply voltage
max. 250 V AC (Class II / EN 61347)
Supply voltage range
110 V AC ... 277 V AC -13 % ... +6 %
Current consumption
max. 8 A (with active consumers)
Output name
Analog voltage output
Relay output
Current output signal
max. -20 mA (Current sink)
Output voltage
250 V AC (Soft start function to reduce the inrush current of the LED drivers, not suitable for inductive loads)
Output current
28 mA (guaranteed, max. 14 DALI devices)
max. 40 mA
max. 8 A (max. 5 A per relay, resistive load for applications with UL/CSA approval)
Nominal output voltage
max. 277 V AC (50 Hz ... 60 Hz)
Connection method
Push-in spring connection
Note on the connection method
pluggable
Use copper wire, that is approved up to 85°C.
Conductor cross-section, rigid
0.2 mm² ... 1.5 mm²
0.34 mm² ... 4 mm²
Conductor cross-section, flexible
0.2 mm² ... 1.5 mm²
0.2 mm² ... 2.5 mm²
Conductor cross-section AWG
Note on dimensions
Tolerance of all dimensions: ±0.2 mm
Ambient temperature (operation)
Degree of protection
IP20 (touch-proof (per manufacturer's declaration))
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)
70 hPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)
Permissible humidity (operation)
5 % ... 95 % (up to 45°C in accordance with EN 60068-2-78:2013)
Permissible humidity (storage/transport)
5 % ... 90 % (according to DIN EN 61131-2, non-condensing, no ice formation)
Shock in accordance with EN 60068-2-27/IEC 60068-2-27
30g, 11 ms period, half-sine shock pulse
Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6
Mounting type
Mounting on a surface (Mounting in the control box)