Nominal input voltage UIN
Nominal input current at UIN
Test voltage: 24 V supply UA1/24 V supply L+ (IO-Link)
Test voltage: 24 V supply UA2/24 V supply L+ (IO-Link)
Test voltage: 24 V supply UA1/functional ground
Test voltage: 24 V supply UA2/functional ground
Test voltage: 24 V supply UA1/24 V supply UA2
Description of the input
IEC 61131-2 types 1 and 3
Volume concentration H2S (Hydrogen sulfide)
Volume concentration NO2 (Nitrogen dioxide)
Cable length
max. 30 m (to the sensor)
Volume concentration Cl2 (Chlorine)
Connection method
M12 connector
M12 connector, A-coded
M12 connector, L-coded
Volume concentration SO2 (Sulfur dioxide)
Note on the connection method
Push-pull fast connection according to IEC 61076-2-010 or screw connection according to IEC 61076-2-101
Screw connection in accordance with IEC 61076-2-111
Input voltage range "0" signal
Input voltage range "1" signal
Nominal input voltage U<sub>IN</sub>
Nominal input current at U<sub>IN</sub>
Protective circuit
Overload protection; yes
Reverse polarity protection; yes
Short-circuit protection; yes
Reverse polarity protection
Amount of process data
1 Byte (Output data)
3 Byte (Input data)
Nominal output voltage
24 V DC (from U<sub>A1</sub>, U<sub>A2</sub>)
Output voltage range
min. U<sub>A1</sub> - 1 V ... max. U<sub>A1</sub>
min. U<sub>A2</sub> - 1 V ... max. U<sub>A2</sub>
Output voltage when switched off
Output current when switched off
Nominal load, inductive
48 VA (1.2 H, 12 Ω, at nominal voltage, utilization category DC-13)
Nominal load, ohmic
48 W (12 Ω, at nominal load)
Switching frequency
max. 1 per second (with inductive load)
Reverse voltage resistance to short pulses