A suitable flyback diode must be used when switching inductive loads
Do not connect adjacent channels to SELV/ PELV and voltages dangerous to the touch.
Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.
If the DIP switches are not covered by an adjacent module, the PLC-ATP partition plate must be used for ESD protection
Repeated hard short circuits can reduce the melting integral of the integrated backup fuse.
The device contains components that can be damaged or destroyed by electrostatic discharge. When handling the device, observe the necessary safety precautions against electrostatic discharge (ESD) according to EN 61340-5-1 and EN 61340-5-2.
The PLC-ATP separating plate should be installed for safe isolation between adjacent modules