Connection method
Card edge connector
Push-in connection
Transmission speed
See system in which you use the Smart Element.
Input address area
0 Byte (All systems except PROFIBUS)
1 Byte (PROFIBUS)
Required configuration data
Mounting position
See the system in which the Smart Element is used.
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Supply voltage
24 V DC (from U<sub>P</sub>)
24 V DC (using card edge connectors)
using card edge connectors
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current consumption
min. 10 mA (without connected peripherals)
Protective circuit
Reverse polarity protection; Polarity protection diode
Surge protection; See the system in which the Smart Element is used.
Protection
See the system in which the Smart Element is used.
Designation
Sensor supply (U<sub>P</sub>1, U<sub>P</sub>2)
Test voltage: Communications supply / 24 V supply (I/O)
Test voltage: Communications supply / functional ground
Test voltage: 24 V supply (I/O) / functional ground
Note on the connection method
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG
Conductor cross-section, flexible, with ferrule, with plastic sleeve
Conductor cross-section, flexible, with ferrule, without plastic sleeve
Ambient temperature (operation)
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6
Shock in accordance with EN 60068-2-27/IEC 60068-2-27
Continuous shock in accordance with EN 60068-2-27/IEC 60068-2-27
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)