Contact holder in insertRequirements >20 N
Contact resistance R2 2nd level
Nominal current I<sub>N</sub>
Nominal voltage U<sub>N</sub>
Rated surge voltage (III/3)
Rated surge voltage (III/2)
Rated surge voltage (II/2)
Conductor cross-section AWG
Metal surface contact area (top layer)
Insulating material group
CTI according to IEC 60112
Flammability rating according to UL 94
Note on the contact
These connectors conform to DIN EN 61984, connectors without switching power (COC). When used for their intended purpose, they must not be plugged in or disconnected live or under load.
Note on application
All laboratory tests are performed in combination with the crimp contacts specified as accessories.
The corresponding crimp contacts are to be found in the "Accessories" tab.
The current depends on the crimp contact and conductor cross-section used.
Conductor cross-section/conductor type/tractive force setpoint/actual value
AWG 28 / flexible / > 11 N
Insertion strength per pos. approx.
Withdraw strength per pos. approx.
Specification
IEC 60068-2-6:2007-12
IEC 60068-2-70:1995-12
IEC 60512-1-1:2002-02
IEC 60512-1-2:2002-02
IEC 60512-13-5:2006-02
IEC 60512-15-1:2008-05
IEC 60512-3-1:2002-02
IEC 60512-5-1:2002-02
IEC 60512-9-1:2010-03
IEC 60664-1:2007-04
ISO 6988:1985-02
Contact holder in insert<br/>Requirements >20 N
Tested number of positions
Insulation resistance, neighboring positions
Comparative tracking index (IEC 60112)
Rated insulation voltage (III/3)
minimum clearance value - non-homogenous field (III/3)