Connection method
Push-in spring connection
Push-in-/Spring-cage connection
RJ45
RJ45 jack, shielded
Transmission physics
Ethernet in RJ45 twisted pair
Signal LEDs
Supply voltage, data transmission, error, link, activity
Additional text
not electrically isolated
Basic functions
Router with firewall and VPN for 2 tunnels (fixed), plastic housing, slot for SD memory card, extended temperature range, router with firewall and VPN for 2 tunnels (fixed), plastic housing, slot for SD memory card, extended temperature range
Product type
Security router for the DIN rail
Special properties
NAT
Product certified in accordance with IEC 62443-4-2
VPN
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
1:1 Network Address Translation (NAT) in the VPN
Number of VPN tunnels
2 (Fixed, Ipsec (IETF standard))
Authentication
X.509v3 certificates with RSA or PSK
Data integrity
MD5, SHA-1, SHA 256, SHA-512
Dynamic Host Configuration Protocol (DHCP) support
Filtering
Incoming or outgoing traffic
Firewall data throughput
max. 850 Mbps (Stealth mode, default firewall rules, unidirectional throughput)
max. 940 Mbps (Router mode, default firewall rules, unidirectional throughput)
Firewall rules
Simple stateful inspection firewall, safe isolation for PROFIsafe in accordance with IEC 61784-3-3
Internet Protocol Security (IPsec) mode
ESP tunnel / ESP transport
Link Layer Discovery Protocol (LLDP)
Network Time Protocol (NTP) client
Routing
Standard routing, NAT, 1:1-NAT, port forwarding
Protection against
IP spoofing, DoS and Syn Flood Protection
Encryption methods
DES, 3DES, AES-128, -192, -256
Virtual private network (VPN) throughput
max. 250 Mbps (Router mode, VPN unidirectional throughput)
Local diagnostics
One LED per port Link active / Speed Green / green/yellow LED
US1 Supply voltage US1 Green LED
Maximum power dissipation for nominal condition
Power supply connection
via COMBICON, max. conductor cross-section 1.5 mm²
Residual ripple
3.6 V<sub>PP</sub> (within the permitted voltage range)
Typical current consumption
120 mA (at U<sub>S</sub> = 24 V DC)
Signal contact control voltage
Signal contact control current
250 mA (short-circuit-proof)
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG