Product type
PCB terminal block
Printed circuit board terminal
Solder pins per potential
Nominal current I<sub>N</sub>
Nominal voltage U<sub>N</sub>
Rated surge voltage (III/3)
Rated surge voltage (III/2)
Rated surge voltage (II/2)
Connection method
Screw connection with tension sleeve
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG
Conductor cross-section, flexible, with ferrule, without plastic sleeve
Conductor cross-section, flexible, with ferrule, with plastic sleeve
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Metal surface terminal point (top layer)
Metal surface terminal point (middle layer)
Nickel (1.3 µm - 4 µm Ni)
Metal surface soldering area (top layer)
Metal surface soldering area (middle layer)
Nickel (1.3 µm - 4 µm Ni)
Insulating material group
CTI according to IEC 60112
Flammability rating according to UL 94
Glow wire flammability index GWFI according to EN 60695-2-12
Glow wire ignition temperature GWIT according to EN 60695-2-13
Temperature for the ball pressure test according to EN 60695-10-2
Recommendation
Further information and detailed dimensions are available in the download area.
Assembly note
For reliable conductor connection, always adhere to a defined tightening torque.<br/>During conductor connection (mounting), the terminal blocks must be supported (held with one hand, support on the housing).
General
We recommend using a soldering frame.