Notes on operation
The PLC-ATP separating plate should be installed for safe isolation between adjacent modules
This item is intended to be used exclusively as a supplied part for further processing by industry, trade, or other companies with expertise in the field of EMC.
Typical input current at UN
Typical input current at UN
Switching threshold "1" signal voltage
Switching threshold "0" signal, voltage
Min. voltage input signal
Max. voltage input signal
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section flexible (2 conductors with same cross section)
0.5 mm² ... 1 mm² (TWIN ferrule with plastic sleeve)
Conductor cross-section AWG
Tightening torque
0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing))
Degree of protection (Installation location)
IP54 (Installation location)
Ambient temperature (operation)
Ambient temperature (storage/transport)
Assembly note
in rows with zero spacing