Product type
Sensor/actuator cable with valve connector
Material housing valve plug
Valve plug contact insert material
Nominal voltage U<sub>N</sub>
Nominal current I<sub>N</sub>
Switch-over time
approx. 200 ms (Initial operating time)
Clock frequency
approx. 2500 Hz (Holding current limiting device)
Switching frequency
max. 5 Hz (Connected valve)
Type
free cable end
Valve connector BI (11 mm)
Material
Ag (Contact surface)
CuSn (Contact)
PBT (Contact carrier)
TPU (Housing)
Protective circuit
Freewheeling diode with holding current limiting device
Cable type
PUR halogen-free black [PUR]
Conductor structure signal line
Wire diameter incl. insulation
1.5 mm ±0.05 mm (Signal line)
Single wire, color
black 1, black 2, green/yellow
Max. conductor resistance
Minimum bending radius, fixed installation
Minimum bending radius, flexible installation
Smallest bending radius, fixed installation
Smallest bending radius, movable installation
Dynamic load capacity (bending)
Max. bending cycles: 15000000, Bending radius: 50 mm, Traversing path: 0.9 m, Traversing rate: 5 m/s, Acceleration: 30 m/s²
Halogen-free
in accordance with DIN VDE 0472 part 815
Flame resistance
According to DIN EN 50265-2-1
according to DIN VDE 0482
Resistance to oil
in accordance with DIN EN 60811-2-1