Assembly note
To ensure correct use, installation in housing with IP54 protection or better is required
General
Connectors may be operated only when there is no load/voltage.
For HEAVYCON housing type D25, CK1,6-ED crimp contacts (crimp contacts not supplied as standard)
It is imperative that guide pins (HC-CST) and sockets (HC-CBU) are used to prevent tip collision due to misalignment.
Product type
Contact insert with a fixed no. of positions
Drill hole distance, horizontal
Drill hole distance, vertical
Connection in acc. with standard
Connection cross section AWG
Tightening torque
0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing)
0.7 Nm ... 1 Nm (PE connection)
Stripping length of the individual wire
Insertion/withdrawal cycles
Flammability rating according to UL 94
Standards/regulations
PC
PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Ambient temperature (operation)
-40 °C ... 125 °C (including heating up of contacts)
Constructional and testing regulations
DIN VDE 0110-1/04.97
DIN VDE 0110/02.79
DIN VDE 0627/86
IEC 60352
IEC 60664-1, DIN IEC 60512
Tests
DIN VDE 0110-1/04.97
DIN VDE 0110/02.79
DIN VDE 0627/86
IEC 60352
IEC 60664-1, DIN IEC 60512