Assembly note
<b>NOTE:</b> Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties.
Max. operating voltage Umax
Note on application
Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories".
Max. operating voltage U<sub>max</sub>
Local diagnostics
Status display I/O Yellow LED
Supply voltage Green LED
Nominal voltage U<sub>N</sub>
Rated current, total
8 A (Higher ratings can be achieved with different configurations)
Max. current carrying capacity per path
Current carrying capacity per slot
Sensor/actuator connection system
Conductor cross-section Flexible signal line
Conductor cross-section Flexible power supply
Connection cross section AWG Flexible signal line
Connection cross section AWG Flexible power supply
Stripping length Signal line
Stripping length Power supply
Stripping length of the sheath
Tightening torque, cover screw
Tightening torque slot sensor/actuator cable
Tightening torque of mounting screw for fixing the housing
Tightening torque, union nut
Slot/position = Wire color or connection
1 / 2 (B) = GYPK
1 / 4 (A) = WH
1-8 / 1 (+ 24 V) = BN
1-8 / 3 (0 V) = BU
1-8 / 5 (PE) = GNYE
2 / 2 (B) = RDBU
2 / 4 (A) = GN
3 / 2 (B) = WHGN
3 / 4 (A) = YE
4 / 2 (B) = BNGN
4 / 4 (A) = GY
5 / 2 (B) = WHYE
5 / 4 (A) = PK
6 / 2 (B) = YEBN
6 / 4 (A) = RD
7 / 2 (B) = WHGY
7 / 4 (A) = BK
8 / 2 (B) = GYBN
8 / 4 (A) = VT
Material Molding compound
Flammability rating according to UL 94
Material of the contact carrier on the master cable side
Connection method
Push-in-/Spring-cage connection
Ambient temperature (operation)