Assembly note
<b>NOTE:</b> Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties.
Max. operating voltage Umax
Note on application
Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories".
Monitored function
Supply voltage per module
Max. operating voltage U<sub>max</sub>
Local diagnostics
Status display I/O Yellow LED
Supply voltage per module Green LED
Nominal voltage U<sub>N</sub>
Rated current, total
70 A (at 40 °C, observe the distribution of the current paths under load)
Protective circuit
Overload protection for the outputs; Fuse in header
Max. current carrying capacity per path
Current carrying capacity per slot
Sensor/actuator connection system
Conductor cross-section Flexible power supply
Connection cross section AWG Flexible power supply
Tightening torque, cover screw
Tightening torque slot sensor/actuator cable
Tightening torque, union nut
Material Molding compound
Flammability rating according to UL 94
Contact surface material
pre-nickel plated, gold-plated
Material of contact, master cable side
Material of the contact carrier on the master cable side
Material of contact surface, master cable side
Connection method
Plug-in master cable connection
Ambient temperature (operation)
Ambient temperature (storage/transport)
Standard designation
M12 connector
Shock, vibration
Standards/specifications
EN 60068-2-27
EN 60068-2-6
EN 60068-2-64
IEC 61076-2-111