HC-M-03-PN-M-F Contact insert module

Connectors may be operated only when there is no load/voltage.

For HEAVYCON ADVANCE housing type B6 to B24 and HEAVYCON housing type B6 to B48. HEAVYCON HC-M-B...-MF... module carrier frame required, HC-M-PN... pneumatic pins and sockets are not supplied as standard.

The use of guide pins (HC-CST) and sockets (HC-CBU) is recommended to prevent tip collision due to misalignment.

Pneumatic insert, modular

HC-M-03-PN

Pneumatics

3

3

1 - 3

1

No

34.1 mm

27.2 mm

14.6 mm

1.6 mm

3 mm

4 mm

5.2 mm

V0

PC

PC

PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)

≥ 500

-40 °C ... 80 °C

- Snap the pneumatic contact and module together. Insert the contact into the module from the front
- Place the modules assembled with the contacts in the module carrier frame.
- The pneumatic tubes are pushed onto the pneumatic contact from

To ensure correct use, installation in housing with IP54 protection or better is required