Note
Depending on the application case and mechanical load, other arrangements of the mounting accessory can also be chosen.
Flange covers should be placed after 5 middle versions.
Securing pin versions should be placed after 3 middle versions.
The max. load current must not be exceeded by the total current of all connected conductors.
When aligning several middle versions, the foot versions should be placed so that a maximum of 5 middle versions can be freely attached between them.
Maximum power dissipation for nominal condition
Number of connections per level
Internal cylindrical gage
Connection in acc. with standard
Conductor cross-section rigid
0.14 mm² ... 4 mm²
0.34 mm² ... 4 mm²
Cross section AWG
26 ... 12 (converted acc. to IEC)
Conductor cross-section flexible
Conductor cross-section, flexible [AWG]
26 ... 12 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
0.14 mm² ... 2.5 mm²
0.34 mm² ... 2.5 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)
0.14 mm² ... 2.5 mm²
0.34 mm² ... 2.5 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Maximum load current
29 A
30 A (with 4 mm² conductor cross-section)
Operating temperature range
Ex-certified accessories
1075386 D-MPT 2,5-L
1204517 SZF 1-0,6X3,5
3022218 CLIPFIX 35
3022263 CLIPFIX 15
3249010 D-MPT 2,5-F
3249019 D-MPT 2,5-RZ
List of bridges
Plug-in bridge / FBS 10-5 / 3030213
Plug-in bridge / FBS 2-5 / 3030161
Plug-in bridge / FBS 20-5 / 3030226
Plug-in bridge / FBS 3-5 / 3030174
Plug-in bridge / FBS 4-5 / 3030187
Plug-in bridge / FBS 5-5 / 3030190
Plug-in bridge / FBS 50-5 / 3038930
- At bridging between non-adjacent terminal blocks
- At cut-to-length bridging
- At cut-to-length bridging with cover
Connection capacity rigid
Connection capacity flexible
Flammability rating according to UL 94