Assembly note
<b>NOTE:</b> Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties.
Max. operating voltage Umax
Note on application
Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories".
Application
Standard, extended requirements
Max. operating voltage U<sub>max</sub>
Local diagnostics
Status display I/O Yellow LED
Supply voltage Green LED
Nominal voltage U<sub>N</sub>
Max. current carrying capacity per path
Current carrying capacity per slot
Sensor/actuator connection system
Conductor cross-section Flexible signal line
Conductor cross-section Flexible power supply
Connection cross section AWG Flexible signal line
Connection cross section AWG Flexible power supply
Stripping length Signal line
Tightening torque slot sensor/actuator cable
Tightening torque of mounting screw for fixing the housing
Slot/position = Wire color or connection
1 / 2 (B) = 1 / 2
1 / 4 (A) = 1 / 4
1-8 / 1 (+ 24 V) = U<sub>N</sub>
1-8 / 3 (0 V) = 0 V
1-8 / 5 (PE) = PE
2 / 2 (B) = 2 / 2
2 / 4 (A) = 2 / 4
3 / 2 (B) = 3 / 2
3 / 4 (A) = 3 / 4
4 / 2 (B) = 4 / 2
4 / 4 (A) = 4 / 4
5 / 2 (B) = 5 / 2
5 / 4 (A) = 5 / 4
6 / 2 (B) = 6 / 2
6 / 4 (A) = 6 / 4
7 / 2 (B) = 7 / 2
7 / 4 (A) = 7 / 4
8 / 2 (B) = 8 / 2
8 / 4 (A) = 8 / 4
Material Molding compound
Material of contact, master cable side
Material of the contact carrier on the master cable side
Material of contact surface, master cable side
Connection method
Rear plug-in spring connection
Degree of protection
IP54 (with sealed mounting holes)
Ambient temperature (operation) (male connector/female connector)
Ambient temperature (storage/transport)