Nominal input voltage UIN
Nominal input current at UIN
Test voltage: Communications power supply / 24 V supply UP
Test voltage: 24 V supply UP / functional ground
Test voltage: I/O channel / 24 V supply UP
Connection method
Card edge connector
Push-in connection
Transmission speed
See system in which you use the Smart Element.
Start time until ready to operate
Required configuration data
Input voltage range "0" signal
Input voltage range "1" signal
-60 V DC ... -15 V DC
15 V DC ... 60 V DC
Nominal input voltage UIN
Nominal input current at UIN
Current flow
linear until nominal current is reached, then constantly approx. 2.4 mA
Mounting position
See the system in which the Smart Element is used.
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Supply voltage
using card edge connectors
Test voltage: Communications power supply / 24 V supply UP
Test voltage: 24 V supply UP / functional ground
Test voltage: Communications supply / functional ground
Test voltage: I/O channel / supply logic
Test voltage: I/O channel / 24 V supply UP
Test voltage: I/O channel / functional ground
Test voltage: I/O channel / I/O channel
Note on the connection method
Conductor cross-section, rigid
Conductor cross-section, flexible