Nominal current I<sub>N</sub>
Test voltage
500 V AC IEC 60512-4-1:2003-05
Rated surge voltage (I/1)
Note
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Metal surface contact area (top layer)
Metal surface contact area (middle layer)
Nickel (1.27 µm - 5 µm Ni)
Metal surface soldering area (top layer)
Metal surface soldering area (middle layer)
Nickel (1.27 µm - 5 µm Ni)
Insulating material group
CTI according to IEC 60112
Flammability rating according to UL 94
Notes on operation
The permissible voltage during operation depends on the application, taking into consideration the air clearances and creepage distances within the scope of insulation requirements in accordance with IEC 60664-1.
Center offset
± 0.7 mm in longitudinal and transverse direction
Stack height
11 mm Tolerance: +0.6 mm (in combination with Range of articles:FS 0,635/..-MV-R- 8,0)
8 mm Tolerance: +0.6 mm (in combination with Range of articles:FS 0,635/..-MV-R- 5,0)
Angular tolerance
± 10 ° in longitudinal and transverse direction (when plugging in)
Axial offset in X direction (longitudinal)
± 0.7 mm (in longitudinal and transverse direction (when plugged in))
Axial offset in Y direction (transversal)
± 0.7 mm (in longitudinal and transverse direction (when plugged in))
Specification
DIN EN 50155 (VDE 0115-200):2022-06
IEC 60068-2-27:2008-02
IEC 60068-2-6:2007-12
IEC 60068-2-60:2015-06
IEC 60512-3-1:2002-02
IEC 60512-5-2:2002-02
IEC 60512-9-1:2010-03 (following)
IEC 60664-1:2007-04
IEC 61373:2010-05
Tested number of positions
Insulation resistance, neighboring positions
Minimum value for clearance and creepage distance
Contact resistance R<sub>1</sub>
Contact resistance R<sub>2</sub>
Insertion/withdrawal cycles
Power-frequency withstand voltage